PERMIT DRAWINGS · FRESNO, CA
Permit drawings in Fresno, CA, at a fixed price
Fresno sits in Seismic Design Category D, so most new structures here need engineered shear walls on top of the architectural set. We draw the set to what the Building and Safety reviews, coordinate with your engineer, and quote it all in writing within 2 working hours.
- ✓ Plan check here: about 10 weeks
- ✓ Energy forms for climate zone 3B
- ✓ SDC D: engineer coordination included
- ✓ Corrections answered free
What permit drawings cost in Fresno
A permit set for a project in Fresno, CA costs $1 per square foot of drawn floor area, with a $1,200 minimum, or $195 per sheet for new construction under 1,200 sq ft.
Residential permits here are reviewed by the Building and Safety, phone (559) 621-8084. Plan check takes about 10 weeks for a typical residential submittal, so from ordering drawings to first comments, plan on roughly 12 weeks.
| Project | Drawn area | Fixed fee | What sets the fee |
|---|---|---|---|
| Garage conversionProject minimum | 400 sq ft | $1,200 | Project minimum |
| New ADU at Fresno's 1,400 sq ft cap$1 per sq ft | 1,400 sq ft | $1,400 | $1 per sq ft |
| Addition with existing rooms shown$1 per sq ft | 1,500 sq ft | $1,500 | $1 per sq ft |
Local data last checked .
What makes a Fresno permit set different
California's energy code is stricter than the national model code, and climate zone 3B sets the insulation, window and HVAC targets your drawings have to show in Fresno.
Seismic Design Category D means new structures and large openings in bearing walls usually need engineered shear walls, hold-downs and a structural engineer's calculations, so plan for an engineer on anything beyond interior work.
For ADUs, Fresno allows up to 1,400 sq ft and 30 ft in height, with 4 ft side and 4 ft rear setbacks, per our research. An ADU at that cap is billed at $1 per sq ft, so $1,400 for the drawings.
Properties in historic districts go through design review on top of the building permit, which adds a step before plan check.
The full sheet list, and what our fee does and doesn't cover, is on the permit sets page. In Fresno, the sheets that change are the site plan (ADU setbacks of 4 ft side and 4 ft rear), the Title 24 forms for climate zone 3B and the structural sheets your engineer seals.
Submitting in Fresno
You (or your contractor) submit through Fresno's permit portal. We deliver print-ready PDFs set up for electronic submittal, plus native DWG files.
When the reviewers send comments, forward the correction letter. We revise free, as many rounds as it takes, within the scope you approved.
Questions people ask before they order
How much do permit drawings cost in Fresno?
+
At ArchWorkPro, $1 per sq ft of drawn area with a $1,200 minimum, or $195 per sheet for new construction under 1,200 sq ft. City fees are separate.
How long does plan check take in Fresno?
+
About 10 weeks for a typical residential submittal, per our research in July 2026. Confirm with the Building and Safety at (559) 621-8084, since workloads change.
Do I need an engineer in Fresno?
+
For most new structures, yes. Seismic Design Category D means engineered lateral design for new buildings and large openings in bearing walls. You hire the engineer; we draft to their design.
Which energy forms does Fresno want with the drawings?
+
Title 24 compliance forms (CF1R) for climate zone 3B, under the California Energy Code (Title 24, Part 6). We prepare them with the set.
How big can an ADU be in Fresno?
+
Up to 1,400 sq ft, 30 ft tall, with 4 ft side and 4 ft rear setbacks, per our research. Confirm current limits with the city before you design; we check them when we quote.
Related: What is in a permit set · For owner-builders · ADU plans · Visalia, CA · Los Angeles, CA · San Jose, CA · Irvine, CA · Chula Vista, CA · Stamp rules in California · All cities
Get your Fresno permit set quoted
Send the address, a sketch and rough dimensions. Within 2 working hours you get a fixed fee, the sheet list and a delivery date.
Request a Fixed Quote →